Advantages-And-Disadvantages-Monoshock

advantages-and-disadvantages-monoshock

Replacing the motor from the twin shock suspension shockbreaker alias alias shockbreaker twins into a single monoshock has now become a trend everywhere. In addition to a more stylized - as mono suspension system is usually used by the motor racing circuit and in both matches crosstrack - also become more stable driving.

"For the monoshock, then when the motor pedestal maneuver load on just one point so bike more stable". Conversely, when the motor using the double shockbreaker pedestal undue burden on the equally great in both shock is only supported by a single shock when cornering and swerving motorcycles and weaving. Consequently, the motor is not stable when motorists to maneuver.

As a result, in addition to motorcycle instability is also less agile to maneuver. However, monoshock it also has some shortcomings. "Plus minus has to be considered, so that the motor can be wise users drive properly and safely,"

So what are the advantages and disadvantages monoshock? What should be done by the owner of the motor? How to modify the motor before using twin shock to monoshock?

Here I share tips for you:

A. Excess


There are several advantages of monoshock suspension devices include:

Soft 1.Lebih
According Opan, experience so far has shown that when users monoshock suspension bike using the devices properly, the device ditoimbulkan effect was much more comfortable than the twin shock. Swing and a softer spring response when the rider climbs bulldoze or potholes.

However, one thing to note their use should also be in accordance with the manufacturer's advice or recommendations. For example, the load being transported does not exceed the set.
"Each motor must have the maximum load rule, for example, the motor weighs only 95 pounds then do a load more than that,"

2. More style
Monoshock devices commonly used by motor sport racing biasadigunakan in the game. Thus, using the device's motor will also emit an aura of sportiness.
Moreover, in terms of a more concise, practical and minimalist. "Views like that that mekmbuat people devoted to the devices,"

3. More stable performance
Monoshock strongly support the stability of the motor when the driver maneuvering around corners, sharp winding roads, potholes or bumpy in the medium or even high speed.
Stability was created because of the burden to be distributed by the motor when the action on the track is supported by a variety of one point from the beginning was prepared capable of withstanding heavy loads. Through monoshock motor load is centered in the middle of the swing arm.
It is different with the twin shock, as from the outset designed to share the load to the second point in each shockbreaker. "So, when cornering or maneuvering loads are supported shockbreaker Distinct. That is what causes instability, "explains Opan.

B. Shortage

Besides exposing monoshock advantages, some drawbacks such devices. Some shortcomings devices include:

1. Not suitable for carrying heavy loads
Because this kind of fulcrum shockbreaker only one place it has always strived mengakut load does not exceed the standards set manufacturer. When you exceed that number, then the components of the device that will quickly wear out or damaged.
In fact, if enforced - for example, driving with three or more - then the shock is likely to subsidence. If that happens, then you must be prepared to spend in deeply, because the cost of expensive repairs.

2. Shorter lifespan
In general, the manufacturer set the life or age shockbreaker is 20 thousand kilometers usage. Indeed, it could be the owner of a motor vehicle suspension devices are still okay despite a distance of 20 thousand kilometers.
"However, they must be vigilant. Therefore, the service life has exceeded the limit of potential can occur when damaged, so it needs high vigilance, "
In addition, the owner of the motor must also be diligent in checking the oil suspension in the tube. Because, if the oil has been diluted can cause the device does not work seacar maximum. If that happens, then the danger was lurking.

3. More expensive
To install or modification of the twin shock to monoshock diperl; ukan cost is not small. With the benchmark price of existing components, to the range of motorcycle modification costs USD 1.8 to 2.5 million.
In addition, the modifications must also be supported by a powerful motor chassis and front suspension devices are qualified. If not, precisely lead to potential accidents. Therefore, it could happen, when the speeding motorcycle suddenly collapses. Motor also wobble-wobble.
However, if the motor has a strong chassis and components and installation price is not expensive, it is much more profitable monoshock.
Those are some advantages and disadvantages monoshock. Hopefully useful.